1. Making a new Crew Served Weapon
To convert a static weapon into a crew served weapon, you need to create the following:
- A proxy weapon
- A carryable weapon that can be mounted on a tripod
- Carryable weapon magazines
- The CSW config in the static weapon
For the following examples, we are going to assume you are modifying your existing static weapon named prefix_hmg and that you are using the same prefix. If you are making a compatibility patch for a third party mod, you should use your own prefix. Do not use ace as your prefix.
1.1 Proxy Weapon
Because the magazine loading time is already handled by the ACE interaction, a proxy weapon with a very low loading time is used. It automatically replaces the default weapon of the turret when CSW is enabled.
class CfgWeapons {
class prefix_hmg_weapon;
class prefix_hmg_weapon_proxy: prefix_hmg_weapon {
magazineReloadTime = 0.5;
};
};
1.2 Carryable Weapon
Carried CSW weapons are technically rocket launchers. This allows the player to carry both a CSW weapon and a backpack with magazines for the CSW.
class CfgWeapons {
class Launcher;
class Launcher_Base_F: Launcher {
class WeaponSlotsInfo;
};
class prefix_hmg_carry: Launcher_Base_F {
// displayName, author, model and picture are omitted and up to you
scope = 2;
modes[] = {};
class ACE_CSW {
type = "weapon"; // Use "weapon" for weapons or "mount" for tripods - see below
deployTime = 4; // How long it takes to deploy the weapon onto the tripod
pickupTime = 4; // How long it takes to disassemble weapon from the tripod
class assembleTo {
// What tripod can this weapon deploy onto, and what vehicle will it spawn when it is deployed
ace_csw_m3Tripod = "prefix_hmg";
};
};
class WeaponSlotsInfo: WeaponSlotsInfo {
// One WeaponSlot with a positive value for iconScale forces game to use icon overlay method
// Required, because the inventory icon has no accessory variants
class MuzzleSlot {
iconScale = 0.1;
};
// Don't forget to set mass to a reasonable value
// We use mass in pounds * 10
mass = 840; // 84 lb / 38 kg
};
};
};
1.3 Carryable Magazines
Vehicle magazines usually don’t have inventory pictures or a 3D model. Because of this, carryable magazines need to be created for the CSW. If one of the existing CSW magazines or an infantry weapon magazine would fit your weapon, you don’t need to create another magazine. Using one of the existing CSW magazines is preferred to prevent confusing players and mission makers.
class CfgMagazines {
class prefix_100rnd_hmg_mag;
class prefix_100rnd_hmg_csw_mag: prefix_100rnd_hmg_mag {
scope = 2;
type = 256; // Must be 256 to show up in Arsenal
count = 100;
model = "\A3\Structures_F_EPB\Items\Military\Ammobox_rounds_F.p3d";
ACE_isBelt = 1; // Enables belt linking for this magazine
};
};
ACE converts the carryable magazines to the vehicle magazines when loading them. To enable this conversion, the ACE_CSW_Groups config needs to be extended.
class ACE_CSW_Groups {
// Using a custom carryable magazine
class prefix_100rnd_hmg_csw_mag { // Same name as the carryable magazine
prefix_100rnd_hmg_mag = 1; // Vehicle magazine that will be loaded when loading this magazine
};
// Using an existing CSW magazine
class ace_csw_100Rnd_127x99_mag {
banana_dummy_ammo = 1;
};
/*
Carryable magazines already defined by ACE:
- ace_csw_100Rnd_127x99_mag
- ace_csw_100Rnd_127x99_mag_red
- ace_csw_100Rnd_127x99_mag_green
- ace_csw_100Rnd_127x99_mag_yellow
- ace_csw_50Rnd_127x108_mag
- ace_csw_20Rnd_20mm_G_belt
- ace_1Rnd_82mm_Mo_HE
- ace_1Rnd_82mm_Mo_Smoke
- ace_1Rnd_82mm_Mo_Illum
- ace_1Rnd_82mm_Mo_HE_Guided
- ace_1Rnd_82mm_Mo_HE_LaserGuided
*/
};
1.4 CSW Config
The final step is to let ACE know how to disassemble and load the static weapon.
class CfgVehicles {
class StaticMGWeapon;
class prefix_hmg: StaticMGWeapon {
class ACE_CSW {
enabled = 1; // Enables ACE CSW for this weapon
proxyWeapon = "prefix_hmg_weapon_proxy"; // The proxy weapon created above
magazineLocation = "_target selectionPosition 'magazine'"; // Ammo handling interaction point location
disassembleWeapon = "prefix_hmg_carry"; // Carryable weapon created above
disassembleTurret = "ace_csw_m3Tripod"; // Which static tripod will appear when weapon is disassembled
ammoLoadTime = 7; // How long it takes in seconds to load ammo into the weapon
ammoUnloadTime = 5; // How long it takes in seconds to unload ammo from the weapon
desiredAmmo = 100; // When the weapon is reloaded it will try and reload to this ammo capacity
// Optional callback function for when the CSW gets disassembled, called with [tripod, staticWeapon]
disassembleFunc = "prefix_fnc_handleDisassembly";
};
};
};
2. Making a new Tripod
If none of the existing ACE tripods fit your weapon, you can create your own. Creating a tripod is similar to creating a crew served weapon and consists of two parts:
- A carryable tripod
- A placeable static tripod
2.2 Carryable Tripod
Creating the carryable tripod is similar to creating a carryable weapon. The config besides the ACE_CSW class has been omitted for brevity and is the same as above.
class CfgWeapons {
class Launcher_Base_F;
class prefix_tripod_carry: Launcher_Base_F {
class ACE_CSW {
type = "mount"; // Use "mount" for tripods
deployTime = 4; // How long it takes to deploy the tripod
pickupTime = 4; // How long it takes to disassemble the tripod
deploy = "prefix_tripod"; // what vehicle will spawn when the tripod is deployed
};
};
};
2.1 CfgVehicles
When deploying a tripod, a static vehicle is spawned to mount weapons onto. Make sure this vehicles interaction point is in a suitable position.
class CfgVehicles {
class ace_csw_baseTripod;
class prefix_tripod: ace_csw_baseTripod {
class ACE_CSW {
disassembleTo = "prefix_tripod_carry";
};
};
};